BTR HEMI VVT Stage 4 Camshaft. Sold as described below; installation labor and tuning are not included.
VVT LOCK-OUT REQUIRED: BTR-VVT-HEMI-LO (Included with cam)
Lifters REQUIRED: Non-MDS (MDS Conversion required) 05038784AD, 2356, 2326
NOTE: The use of a BTR aftermarket spring kit is required due to high valve lift and increased rpm potential in combination with the heavy OEM valves. We also recommend the use of hardened pushrods in power adder applications.
NOTE: To take advantage of this grind, a proper calibration with attention to detail will make this camshaft SHINE!
NOTE: The ‘Stage 4’ Camshaft requires the use of a VVT ‘Lock-Out’ (BTR-VVT-HEMI-LO) to be installed in your cam phaser. This is included in the camshaft box; no need to purchase. However, if you do not already have the required installation tool (BTR-VVT-Hemi-Tool), you will need to purchase the tool separately.
- Manufacturer part number: BTR-57HEMIVVTSTG4
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III Hemi
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: SINGLE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR HEMI VVT Stage 4 Camshaft. Sold as described below; installation labor and tuning are not included.
VVT LOCK-OUT REQUIRED: BTR-VVT-HEMI-LO (Included with cam)
Lifters REQUIRED: Non-MDS (MDS Conversion required) 05038784AD, 2356, 2326
NOTE: The use of a BTR aftermarket spring kit is required due to high valve lift and increased rpm potential in combination with the heavy OEM valves. We also recommend the use of hardened pushrods in power adder applications.
NOTE: To take advantage of this grind, a proper calibration with attention to detail will make this camshaft SHINE!
NOTE: The ‘Stage 4’ Camshaft requires the use of a VVT ‘Lock-Out’ (BTR-VVT-HEMI-LO) to be installed in your cam phaser. This is included in the camshaft box; no need to purchase. However, if you do not already have the required installation tool (BTR-VVT-Hemi-Tool), you will need to purchase the tool separately.
- Manufacturer part number: BTR-57HEMIVVTSTG4
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III Hemi
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: SINGLE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1