BTR Gen V Stage 1 Turbo Camshaft. Sold as described below; installation labor and tuning are not included.
- The use of BTR dual spring kits is required due to high valve lift and increased rpm potential. We also recommend the use of hardened pushrods in power adder applications. - Will work with a stock converter in 6.2 car and truck applications. - May require the use of an aftermarket converter when used in L83 truck applications for best drivability. - Includes a 38% fuel lobe - We recommend using our BTR VVT lockout bushing and using this camshaft in the locked position.
BTR GEN V STAGE 1 TURBO CAMSHAFT - BTR-GENVSTG1TURBO
Cam Specs:
38% FUEL LOBE
215 DEG INT - 23X DEG EXH
112.5 LSA
.639" INT .639"EXH
INTAKE LOBE LIFT @ TDC: 0.04016
BTR is proud to introduce these new editions to our already impressive lineup of Gen V camshafts.
- Manufacturer part number: BTR-GENVSTG1TURBO
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen V LT
- Engine Combination: TURBOCHARGED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: SINGLE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR Gen V Stage 1 Turbo Camshaft. Sold as described below; installation labor and tuning are not included.
- The use of BTR dual spring kits is required due to high valve lift and increased rpm potential. We also recommend the use of hardened pushrods in power adder applications. - Will work with a stock converter in 6.2 car and truck applications. - May require the use of an aftermarket converter when used in L83 truck applications for best drivability. - Includes a 38% fuel lobe - We recommend using our BTR VVT lockout bushing and using this camshaft in the locked position.
BTR GEN V STAGE 1 TURBO CAMSHAFT - BTR-GENVSTG1TURBO
Cam Specs:
38% FUEL LOBE
215 DEG INT - 23X DEG EXH
112.5 LSA
.639" INT .639"EXH
INTAKE LOBE LIFT @ TDC: 0.04016
BTR is proud to introduce these new editions to our already impressive lineup of Gen V camshafts.
- Manufacturer part number: BTR-GENVSTG1TURBO
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen V LT
- Engine Combination: TURBOCHARGED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: SINGLE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1