BTR Ford Godzilla 7.3 U-231 Camshaft - BTR-GZ231. Sold as described below; installation labor and tuning are not included.
NOTE: To take full advantage of this grind, it is imperative to utilize VVT control and engine tuning. A proper calibration with attention to detail in this respect will make this camshaft SHINE! *See Cam Card for recommended Holley VVT Target Table.*
NOTE: The ‘U231’ Camshaft requires the use of a VVT ‘Limiter’ (BTR-VVT-GZ-8CAM - INCLUDED) to be installed in your cam phaser.
BTR GODZILLA U-231 CAMSHAFT
231/24X .663"/.663" 110 LSA
INTAKE LOBE LIFT @ TDC: 0.094
Due to tight valve clearance, and the extra RPM capability, we recommend only using this camshaft with a quality aftermarket rod & piston combination.
FOR GODZILLA TORQUE SPECS, DIAGRAMS, AND OTHER TECHNICAL INFO, VISIT: BRIANTOOLEYRACING.COM/TECHNICAL
- Manufacturer part number: BTR-GZ231
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Ford Godzilla
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: SINGLE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR Ford Godzilla 7.3 U-231 Camshaft - BTR-GZ231. Sold as described below; installation labor and tuning are not included.
NOTE: To take full advantage of this grind, it is imperative to utilize VVT control and engine tuning. A proper calibration with attention to detail in this respect will make this camshaft SHINE! *See Cam Card for recommended Holley VVT Target Table.*
NOTE: The ‘U231’ Camshaft requires the use of a VVT ‘Limiter’ (BTR-VVT-GZ-8CAM - INCLUDED) to be installed in your cam phaser.
BTR GODZILLA U-231 CAMSHAFT
231/24X .663"/.663" 110 LSA
INTAKE LOBE LIFT @ TDC: 0.094
Due to tight valve clearance, and the extra RPM capability, we recommend only using this camshaft with a quality aftermarket rod & piston combination.
FOR GODZILLA TORQUE SPECS, DIAGRAMS, AND OTHER TECHNICAL INFO, VISIT: BRIANTOOLEYRACING.COM/TECHNICAL
- Manufacturer part number: BTR-GZ231
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Ford Godzilla
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: SINGLE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1