BTR LS1/LS2 Stage 1 V2 Camshaft. Sold as described below; installation labor and tuning are not included.
BTR LS1/LS2 STAGE 1 CAMSHAFT
Specs: 217/23X .615"/.636" 113 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.0502"
Developed and ground in-house using state of the art BTR lobes, the new Stage 1 V2 cam is the latest offering in the LS1/LS2 line up. The all new BTR LS1 Stage 1 V2 camshaft makes more power and torque everywhere in the curve compared to the OEM factory camshaft. This camshaft provides a MILD idle along with great driveability for daily driving, yet makes significantly more midrange and top end power with an almost 15% horsepower gain at peak over the factory LS2 camshaft.
An aftermarket stall, although not necessarily needed in some applications, will help to unlock this camshaft's full potential.
- Manufacturer part number: BTR-LS1STAGE1
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR LS1/LS2 Stage 1 V2 Camshaft. Sold as described below; installation labor and tuning are not included.
BTR LS1/LS2 STAGE 1 CAMSHAFT
Specs: 217/23X .615"/.636" 113 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.0502"
Developed and ground in-house using state of the art BTR lobes, the new Stage 1 V2 cam is the latest offering in the LS1/LS2 line up. The all new BTR LS1 Stage 1 V2 camshaft makes more power and torque everywhere in the curve compared to the OEM factory camshaft. This camshaft provides a MILD idle along with great driveability for daily driving, yet makes significantly more midrange and top end power with an almost 15% horsepower gain at peak over the factory LS2 camshaft.
An aftermarket stall, although not necessarily needed in some applications, will help to unlock this camshaft's full potential.
- Manufacturer part number: BTR-LS1STAGE1
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1