BTR LS1/LS2 Stage 2 V2 Camshaft - BTR-LS1STAGE2. Sold as described below; installation labor and tuning are not included.
BTR LS1/LS2 STAGE 2 CAMSHAFT
Specs: 221/24x .624"/.636" 112 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.0502"
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 2 V2 cam is the latest offering in the LS1/LS2 line up. We went back to the drawing board to find even more power and torque. This camshaft has a moderate idle for use in daily driving, yet makes significantly more midrange and top end power over Stage 1, with an over 16% horsepower gain at peak over the factory LS2 camshaft.
An aftermarket stall is recommended to help unlock this camshaft's full potential.
These new BTR lobe designs were Spintron and Engine Dyno tested to achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
- Manufacturer part number: BTR-LS1STAGE2
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR LS1/LS2 Stage 2 V2 Camshaft - BTR-LS1STAGE2. Sold as described below; installation labor and tuning are not included.
BTR LS1/LS2 STAGE 2 CAMSHAFT
Specs: 221/24x .624"/.636" 112 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.0502"
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 2 V2 cam is the latest offering in the LS1/LS2 line up. We went back to the drawing board to find even more power and torque. This camshaft has a moderate idle for use in daily driving, yet makes significantly more midrange and top end power over Stage 1, with an over 16% horsepower gain at peak over the factory LS2 camshaft.
An aftermarket stall is recommended to help unlock this camshaft's full potential.
These new BTR lobe designs were Spintron and Engine Dyno tested to achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
- Manufacturer part number: BTR-LS1STAGE2
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1