BTR LS1/LS2 Stage 3 V2 Camshaft. Sold as described below; installation labor and tuning are not included.
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 3 V2 cam is the latest offering in the LS1/LS2 line up. This camshaft has an aggressive idle, and works well in the mid to upper rpm range with 18% horsepower gains at peak over the OEM LS2 camshaft. This camshaft will not require any flycutting of pistons with OEM combustion chamber size. If you mill your heads, it is always advised to check piston-to-valve clearance.
BTR LS1/LS2 STAGE 3 CAMSHAFT
Specs: 227/24x .636"/.636" 111.5 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.062"
An aftermarket stall is necessary to help unlock this camshaft's full potential.
Requires the use of our .660" Lift Platinum spring kit with titanium retainers and hardened pushrods.
- Manufacturer part number: BTR-LS1STAGE3
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR LS1/LS2 Stage 3 V2 Camshaft. Sold as described below; installation labor and tuning are not included.
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 3 V2 cam is the latest offering in the LS1/LS2 line up. This camshaft has an aggressive idle, and works well in the mid to upper rpm range with 18% horsepower gains at peak over the OEM LS2 camshaft. This camshaft will not require any flycutting of pistons with OEM combustion chamber size. If you mill your heads, it is always advised to check piston-to-valve clearance.
BTR LS1/LS2 STAGE 3 CAMSHAFT
Specs: 227/24x .636"/.636" 111.5 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.062"
An aftermarket stall is necessary to help unlock this camshaft's full potential.
Requires the use of our .660" Lift Platinum spring kit with titanium retainers and hardened pushrods.
- Manufacturer part number: BTR-LS1STAGE3
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1