BTR LS1/LS2 Stage 4 V2 Camshaft. Sold as described below; installation labor and tuning are not included.
233/24X .636"/.636" 111 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.075"
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 4 V2 is the largest offering in our naturally aspirated LS1/LS2/LS6 lineup. The NEW Stage 4 cam has been refined to offer even more power and torque than our previous Stage 4 cam , all while delivering the reliability and value you've come to expect from BTR. This camshaft has a very aggressive idle and lets others know you're packing something serious under the hood of your daily driver or weekend warrior.
ANY cylinder head milling with the use of factory pistons requires you to fly cut the valve pockets and check piston to valve clearance!
- Manufacturer part number: BTR-LS1STAGE4
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR LS1/LS2 Stage 4 V2 Camshaft. Sold as described below; installation labor and tuning are not included.
233/24X .636"/.636" 111 LSA
INTAKE LOBE LIFT @ T.D.C. - 0.075"
Developed and ground in-house using state of the art BTR designed lobes, the new LS1 Stage 4 V2 is the largest offering in our naturally aspirated LS1/LS2/LS6 lineup. The NEW Stage 4 cam has been refined to offer even more power and torque than our previous Stage 4 cam , all while delivering the reliability and value you've come to expect from BTR. This camshaft has a very aggressive idle and lets others know you're packing something serious under the hood of your daily driver or weekend warrior.
ANY cylinder head milling with the use of factory pistons requires you to fly cut the valve pockets and check piston to valve clearance!
- Manufacturer part number: BTR-LS1STAGE4
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: NATURALLY ASPIRATED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1