BTR 400+ LS Medium Turbo Camshaft For 1.8 Rocker Ratio - BTR-LSMT400+18. Sold as described below; installation labor and tuning are not included.
BTR 400+ LS MEDIUM TURBO CAMSHAFT FOR 1.8 ROCKER RATIO
234/25X .644"/.644" 119 LSA
INTAKE LOBE LIFT @ TDC: 0.04900
The new BTR 400+ MEDIUM Turbo cam for 1.8 rocker ratio was designed for use with an S400 88MM-94MM single turbo in Gen III and Gen IV LS 4" stroke combos using 1.8 ratio rocker arms. This cam is recommended for more serious street/strip type applications looking for maximum power and rpm and offers a moderate idle. This cam uses ultra-stable lobes designed in-house, and Spintron tested for higher RPM potential, and was designed to be extremely durable at high RPM when combined with a lightweight valvetrain.
- Manufacturer part number: BTR-LSMT400+18
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: TURBOCHARGED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR 400+ LS Medium Turbo Camshaft For 1.8 Rocker Ratio - BTR-LSMT400+18. Sold as described below; installation labor and tuning are not included.
BTR 400+ LS MEDIUM TURBO CAMSHAFT FOR 1.8 ROCKER RATIO
234/25X .644"/.644" 119 LSA
INTAKE LOBE LIFT @ TDC: 0.04900
The new BTR 400+ MEDIUM Turbo cam for 1.8 rocker ratio was designed for use with an S400 88MM-94MM single turbo in Gen III and Gen IV LS 4" stroke combos using 1.8 ratio rocker arms. This cam is recommended for more serious street/strip type applications looking for maximum power and rpm and offers a moderate idle. This cam uses ultra-stable lobes designed in-house, and Spintron tested for higher RPM potential, and was designed to be extremely durable at high RPM when combined with a lightweight valvetrain.
- Manufacturer part number: BTR-LSMT400+18
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: TURBOCHARGED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1