BTR LS PDS Stage 3 Torque Camshaft V2. Sold as described below; installation labor and tuning are not included.
BTR PDS STAGE 3 TORQUE CAMSHAFT V2
226/25X .636"/.636" 112.5 LSA
INTAKE LOBE LIFT @ TDC: 0.06097
The V2 PDS Stage 3 Torque camshaft was designed for those customers wanting good low to mid rpm range torque, without sacrificing top end horsepower. This cam has a slightly more aggressive idle than before, yet still provides good drivability. This cam works well with stock long blocks and stock or ported blowers, and also works well using up to a 150 shot of nitrous.
These new BTR lobe designs were Spintron and Engine Dyno tested to achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
E85 fuel is highly recommended.
- Manufacturer part number: BTR-PDSSTAGE3TQ
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: LSA/LS9
- Engine Combination: SUPERCHARGED - ROOTS
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR LS PDS Stage 3 Torque Camshaft V2. Sold as described below; installation labor and tuning are not included.
BTR PDS STAGE 3 TORQUE CAMSHAFT V2
226/25X .636"/.636" 112.5 LSA
INTAKE LOBE LIFT @ TDC: 0.06097
The V2 PDS Stage 3 Torque camshaft was designed for those customers wanting good low to mid rpm range torque, without sacrificing top end horsepower. This cam has a slightly more aggressive idle than before, yet still provides good drivability. This cam works well with stock long blocks and stock or ported blowers, and also works well using up to a 150 shot of nitrous.
These new BTR lobe designs were Spintron and Engine Dyno tested to achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.
E85 fuel is highly recommended.
- Manufacturer part number: BTR-PDSSTAGE3TQ
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: LSA/LS9
- Engine Combination: SUPERCHARGED - ROOTS
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1