BTR .660" Platinum LT4 Valve Spring Kit Stock Guides With Tip Savers - BTR-SK008/2060/BB/TS. Sold as described below; installation labor and tuning are not included.
NOTE: If you already have excessive wear on the rocker arm pad, you must replace these at time of install.
NOTE: Due to the use of lash caps, pushrod length must be verified to achieve the proper lifter preload.
BTR GEN V LT4 PLATINUM DUAL SPRING KIT - .660" LIFT - STOCK GUIDES WITH TIP SAVER KIT BTR-SK008/2060/BB/TS
The kit includes:
SP001-1 0.660" lift dual polished spring (qty 16)
SR006-1 titanium retainer - intake (qty 8)
SR001-1 titanium retainer - exhaust (qty 8)
SL520060-16 locator kit for 0.520" ID stock LT4 powdered metal guides, 0.060" thick
VS LS KIT valve seal kit
VL78MMBL-.075 valve locks 7 degree 8mm -0.75" height - exhaust (8 pairs)
VL7°8MM-1 valve locks 7 degree 8mm std height - intake (8 pairs)
- Manufacturer part number: BTR-SK008/2060/BB/TS
- Brand: Brian Tooley Racing
- Part Type: Valve Spring Kit
- Engine Type: Gen V LT4
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR .660" Platinum LT4 Valve Spring Kit Stock Guides With Tip Savers - BTR-SK008/2060/BB/TS. Sold as described below; installation labor and tuning are not included.
NOTE: If you already have excessive wear on the rocker arm pad, you must replace these at time of install.
NOTE: Due to the use of lash caps, pushrod length must be verified to achieve the proper lifter preload.
BTR GEN V LT4 PLATINUM DUAL SPRING KIT - .660" LIFT - STOCK GUIDES WITH TIP SAVER KIT BTR-SK008/2060/BB/TS
The kit includes:
SP001-1 0.660" lift dual polished spring (qty 16)
SR006-1 titanium retainer - intake (qty 8)
SR001-1 titanium retainer - exhaust (qty 8)
SL520060-16 locator kit for 0.520" ID stock LT4 powdered metal guides, 0.060" thick
VS LS KIT valve seal kit
VL78MMBL-.075 valve locks 7 degree 8mm -0.75" height - exhaust (8 pairs)
VL7°8MM-1 valve locks 7 degree 8mm std height - intake (8 pairs)
- Manufacturer part number: BTR-SK008/2060/BB/TS
- Brand: Brian Tooley Racing
- Part Type: Valve Spring Kit
- Engine Type: Gen V LT4
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1