BTR .685" Platinum Plus - Cvh Head W/LT4 Valve - Spring Kit Stock Guides - BTR-SKCVH6854. Sold as described below; installation labor and tuning are not included.
The BTR Platinum Plus Spring Kit would be inducted into the LS/LT Aftermarket Hall of Fame if such a thing existed. Whether you’re putting together a daily driver with a mild cam, a 600 hp N/A stroker, or a turbocharged 1000 hp brawler, our Platinum Spring Kit will make sure your valves are right where your cam wants them to be at all times. This is a drop-in kit for LS engines using the BTR canted valve LS1 or LS3 cylinder head engines with stock valve guides and LT4 titanium intake valves and L8T Inconel exhaust valves. It features our titanium retainers and intake valve lash caps - which are REQUIRED when using lightweight Ti valves as the tip ends will wear prematurely without a hardened cap to protect them.
- Manufacturer part number: BTR-SKCVH6854
- Brand: Brian Tooley Racing
- Part Type: Valve Spring Kit
- Engine Type: Gen III/Gen IV LS
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR .685" Platinum Plus - Cvh Head W/LT4 Valve - Spring Kit Stock Guides - BTR-SKCVH6854. Sold as described below; installation labor and tuning are not included.
The BTR Platinum Plus Spring Kit would be inducted into the LS/LT Aftermarket Hall of Fame if such a thing existed. Whether you’re putting together a daily driver with a mild cam, a 600 hp N/A stroker, or a turbocharged 1000 hp brawler, our Platinum Spring Kit will make sure your valves are right where your cam wants them to be at all times. This is a drop-in kit for LS engines using the BTR canted valve LS1 or LS3 cylinder head engines with stock valve guides and LT4 titanium intake valves and L8T Inconel exhaust valves. It features our titanium retainers and intake valve lash caps - which are REQUIRED when using lightweight Ti valves as the tip ends will wear prematurely without a hardened cap to protect them.
- Manufacturer part number: BTR-SKCVH6854
- Brand: Brian Tooley Racing
- Part Type: Valve Spring Kit
- Engine Type: Gen III/Gen IV LS
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1