BTR 400+ LS Small Twin Turbo Camshaft. Sold as described below; installation labor and tuning are not included.
237/25X .619"/.619" 117 LSA
INTAKE LOBE LIFT @ TDC: 0.05840
The new BTR Small Twin Turbo cam was designed for use with smaller twin 66-76 mm setups or up to a single 94mm turbo in 388-427 cubic inch combos. This cam is recommended for street/strip type applications looking for more power and rpm , and offers an aggressive idle. This cam uses ultra stable lobes for higher RPM potential, and was designed to be extremely durable at high rpm when combined with a lightweight valvetrain.
Due to higher rpm potential combined with greater cylinder pressure from boost we recommend the use of our SK703 spring kits and larger diameter hardened pushrods along with a quality lifter such as a Johnson ST2116LSR or ST2126LSR.
- Manufacturer part number: BTR-STT400+
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: TWIN TURBOCHARGED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR 400+ LS Small Twin Turbo Camshaft. Sold as described below; installation labor and tuning are not included.
237/25X .619"/.619" 117 LSA
INTAKE LOBE LIFT @ TDC: 0.05840
The new BTR Small Twin Turbo cam was designed for use with smaller twin 66-76 mm setups or up to a single 94mm turbo in 388-427 cubic inch combos. This cam is recommended for street/strip type applications looking for more power and rpm , and offers an aggressive idle. This cam uses ultra stable lobes for higher RPM potential, and was designed to be extremely durable at high rpm when combined with a lightweight valvetrain.
Due to higher rpm potential combined with greater cylinder pressure from boost we recommend the use of our SK703 spring kits and larger diameter hardened pushrods along with a quality lifter such as a Johnson ST2116LSR or ST2126LSR.
- Manufacturer part number: BTR-STT400+
- Brand: Brian Tooley Racing
- Part Type: Camshaft
- Engine Type: Gen III/Gen IV LS
- Engine Combination: TWIN TURBOCHARGED
- Camshaft Style: HYDRAULIC ROLLER
- Cam Bolt Style: THREE BOLT
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1