BTR .550" Lift Beehive Valve Spring Set - Gen V LVX V6 - BTR91120-12. Sold as described below; installation labor and tuning are not included.
NOTE - BTR does not recommend single wire conical or beehive springs with roller rockers due to the extra mass causing loss of valve train stability, or the use of a higher ratio rocker as it could possibly cause a coil bind issue. If you have a specific combination of valvetrain parts you are needing to use a roller rocker on, please call in to our sales team for clarification.
BTR .550" LIFT GEN V LV0 / LV3 V6 BEEHIVE VALVE SPRING - LIKE 12691120 - BTR91120-12
These beehive springs from BTR are a drop in replacement for the stock valve springs on your LV0 or LV3. Designed to use with stock retainers and locks.
95lbs @ 1.870" 300lbs @ 1.330" Coil bind @ 1.280" 386lb spring rate
- Manufacturer part number: BTR91120-12
- Brand: Brian Tooley Racing
- Part Type: Valve Springs
- Engine Type: GEN V LT V6
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR .550" Lift Beehive Valve Spring Set - Gen V LVX V6 - BTR91120-12. Sold as described below; installation labor and tuning are not included.
NOTE - BTR does not recommend single wire conical or beehive springs with roller rockers due to the extra mass causing loss of valve train stability, or the use of a higher ratio rocker as it could possibly cause a coil bind issue. If you have a specific combination of valvetrain parts you are needing to use a roller rocker on, please call in to our sales team for clarification.
BTR .550" LIFT GEN V LV0 / LV3 V6 BEEHIVE VALVE SPRING - LIKE 12691120 - BTR91120-12
These beehive springs from BTR are a drop in replacement for the stock valve springs on your LV0 or LV3. Designed to use with stock retainers and locks.
95lbs @ 1.870" 300lbs @ 1.330" Coil bind @ 1.280" 386lb spring rate
- Manufacturer part number: BTR91120-12
- Brand: Brian Tooley Racing
- Part Type: Valve Springs
- Engine Type: GEN V LT V6
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1