Configure your parts package. Only the base contents and selected options are included. Installation labor and tuning are separate.
BTR Gen V 220 Camshaft With VVT Limiter. Sold as described below; installation labor and tuning are not included.
This does not come without a small sacrifice to the 5.3L crowd, as you must fly-cut your pistons to allow for this grind to properly fit. However, a DOD delete is also necessary, which means those cylinder heads have to be removed regardless. One extra small step to provide enormous gains across the powerband.
NOTE: To take advantage of this grind, it is imperative to utilize VVT control when tuning. A proper calibration with attention to detail in this respect, will make this camshaft SHINE!
WILL NOT FIT IN A L83 ENGINE UNLESS YOU FLYCUT THE PISTON!
BTR GEN V 220 LT CAMSHAFT
Specs: 220/23X, .644/.644, 113 LSA, 32% fuel lobe
INTAKE LOBE LIFT @ TDC: 0.06590
- Brand: Brian Tooley Racing
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Base contents
- 1 x BTR GEN V 220 CAMSHAFT
Configure your parts package. Only the base contents and selected options are included. Installation labor and tuning are separate.
BTR Gen V 220 Camshaft With VVT Limiter. Sold as described below; installation labor and tuning are not included.
This does not come without a small sacrifice to the 5.3L crowd, as you must fly-cut your pistons to allow for this grind to properly fit. However, a DOD delete is also necessary, which means those cylinder heads have to be removed regardless. One extra small step to provide enormous gains across the powerband.
NOTE: To take advantage of this grind, it is imperative to utilize VVT control when tuning. A proper calibration with attention to detail in this respect, will make this camshaft SHINE!
WILL NOT FIT IN A L83 ENGINE UNLESS YOU FLYCUT THE PISTON!
BTR GEN V 220 LT CAMSHAFT
Specs: 220/23X, .644/.644, 113 LSA, 32% fuel lobe
INTAKE LOBE LIFT @ TDC: 0.06590
- Brand: Brian Tooley Racing
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Base contents
- 1 x BTR GEN V 220 CAMSHAFT
Image 1 of 1