BTR 2009+ 5.7 HEMI .650" Lift Valve Spring Kit With Tip Savers - SK017/TS. Sold as described below; installation labor and tuning are not included.
NOTE - BTR does not recommend single wire conical or beehive springs with roller rockers due to the extra mass causing loss of valve train stability, or the use of a higher ratio rocker as it could possibly cause a coil bind issue. If you have a specific combination of valvetrain parts you are needing to use a roller rocker on, please call in to our sales team for clarification.
Spring Specs:
.650" Lift Spring 160 LB SEAT @ 1.875" INSTALL HEIGHT 395 LB OPEN @ 1.225" COIL BIND @ 1.165"
Kit includes:
SP014-1 BTR conical valve springs (qty 16) SLH815140CON-16 BTR locator kit VSHEM3V-16 BTR 2009+ Gen III Hemi valve seal kit HEMILC-16 BTR lash cap / tip saver kit
- Manufacturer part number: SK017/TS
- Brand: Brian Tooley Racing
- Part Type: Valve Spring Kit
- Engine Type: Gen III Hemi
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
BTR 2009+ 5.7 HEMI .650" Lift Valve Spring Kit With Tip Savers - SK017/TS. Sold as described below; installation labor and tuning are not included.
NOTE - BTR does not recommend single wire conical or beehive springs with roller rockers due to the extra mass causing loss of valve train stability, or the use of a higher ratio rocker as it could possibly cause a coil bind issue. If you have a specific combination of valvetrain parts you are needing to use a roller rocker on, please call in to our sales team for clarification.
Spring Specs:
.650" Lift Spring 160 LB SEAT @ 1.875" INSTALL HEIGHT 395 LB OPEN @ 1.225" COIL BIND @ 1.165"
Kit includes:
SP014-1 BTR conical valve springs (qty 16) SLH815140CON-16 BTR locator kit VSHEM3V-16 BTR 2009+ Gen III Hemi valve seal kit HEMILC-16 BTR lash cap / tip saver kit
- Manufacturer part number: SK017/TS
- Brand: Brian Tooley Racing
- Part Type: Valve Spring Kit
- Engine Type: Gen III Hemi
Match this part to your exact engine, cylinder heads, and intended use. Verify required clearances, spring setup, and measured pushrod length before installation. Cam stages are specific to their cam family.
Shipping: Lower-48 ground shipping is $19.99 per order. Use CAMSHIP199 for free cam-parts ground shipping on orders of $199 or more. Free shop pickup is available after your order is confirmed ready.
Image 1 of 1