Magnuson TVS2650 Ford Coyote 5.0L/5.2L Hot Rod Kit is available through Exodus Performance, an authorized Magnuson dealer.
Specialty kit: installation, custom tuning and additional supporting parts may be required. This is not a turnkey installed package.
Engine and application compatibility
Manufacturer lists 2011–2024 Coyote Mustang engines, 2011–2020 F-150 engines and supported 5.2L Voodoo/GT500/Raptor R engines. A 2021+ F-150 engine requires an inlet spacer.
Required supporting parts and tuning
Choose single or dual throttle-body inlet. Pulley, throttle body and external cooling are separate; select them for the engine controller and drive arrangement. Custom calibration and vehicle clearance work are required. Single-inlet kit uses 57-05-08-XXX-BL pulleys; dual-inlet kit uses 57-03-06-XXX-BL pulleys.
Plan your order
Review the complete combination with your installer before purchase. Engine-family compatibility is not a guarantee of vehicle fitment or emissions approval. Send your engine, cylinder heads, accessory drive, controller, modifications and intended use for a fitment check.
Kit-only sale. Manufacturer-direct fulfillment; not stocked at our shop. Allow approximately 40–60 business days handling plus 5–7 business days transit, subject to confirmation. Baseline eligible commercial-destination freight is $310 within the contiguous U.S.; special delivery services cost extra.
See Magnuson store policies. Call (512) 284-9538 or email sales@exodusperformance.com before ordering if the build requirements are uncertain.
Magnuson TVS2650 Ford Coyote 5.0L/5.2L Hot Rod Kit is available through Exodus Performance, an authorized Magnuson dealer.
Specialty kit: installation, custom tuning and additional supporting parts may be required. This is not a turnkey installed package.
Engine and application compatibility
Manufacturer lists 2011–2024 Coyote Mustang engines, 2011–2020 F-150 engines and supported 5.2L Voodoo/GT500/Raptor R engines. A 2021+ F-150 engine requires an inlet spacer.
Required supporting parts and tuning
Choose single or dual throttle-body inlet. Pulley, throttle body and external cooling are separate; select them for the engine controller and drive arrangement. Custom calibration and vehicle clearance work are required. Single-inlet kit uses 57-05-08-XXX-BL pulleys; dual-inlet kit uses 57-03-06-XXX-BL pulleys.
Plan your order
Review the complete combination with your installer before purchase. Engine-family compatibility is not a guarantee of vehicle fitment or emissions approval. Send your engine, cylinder heads, accessory drive, controller, modifications and intended use for a fitment check.
Kit-only sale. Manufacturer-direct fulfillment; not stocked at our shop. Allow approximately 40–60 business days handling plus 5–7 business days transit, subject to confirmation. Baseline eligible commercial-destination freight is $310 within the contiguous U.S.; special delivery services cost extra.
See Magnuson store policies. Call (512) 284-9538 or email sales@exodusperformance.com before ordering if the build requirements are uncertain.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5